Os sistemas de trituradores NETZSCH M-Ovas® podem sem utilizados onde quer que seja essencial que o material sólido seja quebrado para assegurar a prevenção de entupimentos do tubo e danos para o equipamento.
O projeto especial da carcaça do M-Ovas® transporta os sólidos existentes nas águas residuais para a placa de corte, na qual são mantidos e picados por lâminas rotativas. Este conjunto de baixa manutenção é projetado para lodos com uma vazão de até 300m³/h e um teor de matéria seca de até 7%.
Vantagens do NETZSCH M-Ovas®:
- alta segurança operacional devido à construção robusta
- facilidade de operação e manutenção simples
- baixos custos operacionais por meio de alta eficiência operacional
- ótima relação preço/desempenho
A NETZSCH M-Ovas® é primordialmente utilizada nas seguintes áreas:
- tratamento de águas residuais
- agricultura
- matadouros e fábricas de reciclagem
- fábricas de conservas
- indústria açucareira
- cozinhas industriais
1 Housing
Hydrodynamic design with integrated stone trap for solids, and a clean-out port. The sediment can easily be removed by opening the cover plate. The housing is galvanized to ensure corrosion resistance. Available in stainless steel (optional).
2 Housing cover
Cutting unit integrated into housing cover. A gas strut is fitted to the cover to assist opening.
3 Cutting unit
The cutting plate is made of wear resistant, hardened steel. Optimum cutting performance through cutting unit with a fixed cutting mechanism. Cutting head and cutting blades made from wear resistant hardened steel. The flywheel effect of the cutting head supports the cutting process and reduces the drive power. Easy exchange of cutting plate and cutting blades without disassembling the pipework. A manual adjustment is not necessary due to the pressure spring support.
4 Shaft seal
Single mechanical seal made of hard metal with oil quench to prevent product leakage.
5 Drive
The standard drive unit has reinforced bearings.
6 Inline version
Product inlet and outlet are positioned on the same level. The M-Ovas® can be directly connected to a horizontal pipeline or to a pump inlet where the flange is set at 90°.
- Protects the system from large solids and possible consequential damage
- High cutting efficiency avoids clogging by materials such as fabric remnants or long fibres
- Compact design with high throughput
- Easy and quick removal of the cutting plate, saves time and costs
- Low energy consumption at high throughput rates
- Integrated clean-out port with separate cleaning and drain opening
- Shaft sealed by mechanical seal with grease lubrication
- Particularly maintenance-friendly, no removal from the pipeline necessary
- Cutting plate can be used on both sides
- Different perforated plates depending on the application
